-
December 14th, 2001, 05:18 PM
#1
Inactive Member
I just purchased 2 new front rotors for my 90 Honda civic DX. I have yet to install them. They have a silver finish to them and are cross-drilled and slotted. I got them from Summit racing for $150. I just read Habib's message and was wondering if anyone out there has any exp. with these rotors. Any input would be greatly appreciated.
-
December 14th, 2001, 07:58 PM
#2
Inactive Member
they are known to warp. you should return them and get some brembos at www.groupbuycenter.com. good luck
------------------
-
December 15th, 2001, 02:35 AM
#3
Inactive Member
I have the slotted ones and they are great. had the for about 9 monts still straight and they hel stop the car quick. I love em. make sure you get a Good brake pad though. something like AEM.
as for warping the leadin cause for rotor warp is overtight lug nuts. I insist to have my lugs tighten with a torque wrench and they last.
another thing I remember reading something about powerslot Using Brembo Rotors and slotting/cross drilling them. i'm trying to remember where though.
------------------
*****
1990 Civic H/B *wrecked & being rebuilt*
*****
ZC Powered 90 CRX SI With Mods
I/H/C/E
+
-----------
planned
-----------
- Rims (15")
- Turbo
[This message has been edited by Kunundrum (edited December 14, 2001).]
-
December 15th, 2001, 02:50 AM
#4
Inactive Member
-
December 15th, 2001, 01:10 PM
#5
Inactive Member
yeah i think i am gonna have to sleep outside of blockbuster..lol, no but really i have the powerstop rotors on my 2000 civic and i love them, you shoutld realy read the direcs on the rotors they will tell you what kinda brake bads you need, and get the braded brake lines. they help big time, and theres nothing wrong with the powerstop they are not mad for raceing there just mad to be way better then you stock ones. good luck!!!
and i can't wait till the Fast n' Furious comes out woooo hoooooo
------------------
-
December 17th, 2001, 03:11 PM
#6
Inactive Member
I will continue to bad mouth Powerstop. They are show discs and can't take real use. They offer no warantee on their product and they don't stand up to serious driving. I fried a set of them within months of putting them on and that was on the street.
------------------
-
December 17th, 2001, 03:28 PM
#7
Inactive Member
Many product offer no waranty.
Neuspeed is a prime example, their products offer no waranty against defect, because they are considered for "race/high-performance" applications.
if you only buy stuff with waranties... you must not own much.
------------------
*****
1990 Civic H/B *wrecked & being rebuilt*
*****
ZC Powered 90 CRX SI With Mods
I/H/C/E
+
-----------
planned
-----------
- Rims (15")
- Turbo
-
December 18th, 2001, 11:36 PM
#8
Inactive Member
I buy from people who stand by their product. Powerstop does not. EBC does. I got no response from Powerstop but got personal e-mails from EBC for advice.
The most common reason for rotor warpage is rotors that can't take the heat being put into them. Crap rotors warp sooner.
PS: My wheels are always torqued to 80 ft-lbs.
------------------
-
December 19th, 2001, 03:19 AM
#9
Inactive Member
My Rotors are actualy PowerSLOT not powerStop. these are the ones that use Brembo Rotors and slot them. these are 2 different companies.
OOPS my bad...
------------------
*****
1990 Civic H/B *wrecked & being rebuilt*
*****
ZC Powered 90 CRX SI With Mods
I/H/C/E
+
-----------
planned
-----------
- Rims (15")
- Turbo
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks